Lock cases for solid doors
LC100
|
Lock case with an automatically deadlocking latchbolt. The lock must always be equipped with handles, as the latchbolt is retracted with the handles only. The deadlocking is controlled by a snib in the forend. When the snib is in deadlocking mode, the door is opened by turning the outside key 180° or the inside thumbturn 90°. The handles are then activated, and the latchbolt can be retracted. Snib position: UP = Deadlocking, latchbolt protrudes 21 mm. The lever handles are activated by the key or the thumbturn. DOWN = Latchbolt protrudes 14 mm. The door is opened with the lever handles. The snib is locked to the deadlocking mode by turning a set screw, located below the snib, about two turns anticlockwise by a hexagonal key, until the screw stops and is opened by turning the screw clockwise. LC100X is the microswitch version of the lock. The switch changes it's status when the bolt has protruded to 21 mm. Following striker plates are recommended to be used with a microswitch locking box: 4692, 4693. Striker plate 4690, 4691, LP711, LP714, LP721, LP731 Finish Fe/ZL Cylinders: ABLOY PROTEC ABLOY DISKLOCK PRO ABLOY CLASSIC Fire resistance Yes Mortise standard SFS 5209 |
|
|
|
|
LC120 |
|
|
Double cylinder lock case with an automatically deadlocking latchbolt. The latchbolt protrudes 21 mm. The lock is opened with a key or a thumbturn. The lock can be used in doors, which should be deadlocked always when they are closed. LC120X is the microswitch version of the lock. The switch changes it's status when the latchbolt protrudes 15 mm or more. Striker plates to be used with a microswitch locking box: 4692, 4693. Striker plate 4690, 4691, LP711, LP714, LP721, LP731 Finish Fe/ZL Cylinders: ABLOY PROTEC ABLOY DISKLOCK PRO ABLOY CLASSIC Fire resistance Yes |
|
|
|
|
LC121 |
|
|
Double cylinder lock case with an automatically deadlocking latchbolt. The deadlocking is controlled by a snib in the front plate. Snib position: UP = Deadlocking, latchbolt protrudes 21 mm. The lock can be opened only with a key or a thumbturn. DOWN = Latchbolt protrudes 14 mm. The lock can be opened also with lever handles. LC121X is the microswitch version of the lock. The switch changes it's status when the latchbolt leaves its day locking position, i.e. the bolt protrudes 15 mm or more. Striker plates to be used with a microswitch locking box: 4692, 4693. Striker plate 4690, 4691, LP711, LP714, LP721, LP731 Finish Fe/ZL Cylinders: ABLOY PROTEC ABLOY DISKLOCK PRO ABLOY CLASSIC Fire resistance Yes |
|
|
|
|
LC121T |
|
|
Double cylinder lock case with an automatically deadlocking latchbolt. The deadlocking function is controlled with a rotating snib, operated by a square key, in the forend. Snib function: TURN CLOCKWISE = Deadlocking, latchbolt protrudes 21 mm. The lock can be opened only with a key or thumbturn. TURN ANTICLOCKWISE = Latchbolt protrudes 14 mm. The lock can be opened with a lever handle also. LC121TX is the microswitch version of the lock. The switch changes it's status when the latchbolt leaves its day locking position, i.e. the bolt protrudes 15 mm or more. Striker plates to be used with a microswitch locking box: 4692, 4693. Striker plate 4690, 4691, LP711, LP714, LP721, LP731 Finish Fe/ZL Cylinders: ABLOY PROTEC ABLOY DISKLOCK PRO ABLOY CLASSIC Fire resistance Yes |
|
|
|
|
LC122 |
|
|
Double cylinder lock case with an automatically deadlocking hookbolt for folding and sliding doors. The deadlocking is controlled by the snib in the forend. Snib position: UP = Deadlocking, when the door is closed. The lock can be opened with a key or thumbturn. DOWN = Hookbolt is retained in the lock case. Striker plate 4662 Finish Fe/ZL Cylinders: ABLOY PROTEC ABLOY DISKLOCK PRO ABLOY CLASSIC Fire resistance |
|
|
|
|
LC123 |
|
|
Double cylinder lock case with an automatically deadlocking latchbolt for emergency exit doors. Latchbolt protrudes 21 mm. T he lock case has a double cylinder and an exit thumbturn. The lock can be opened with a key or an exit thumbturn. LC123X is the microswitch version of the lock. The switch changes it's status when the latchbolt protrudes 15 mm or more. Striker plates to be used with a microswitch locking box: 4692, 4693. Striker plate 4690, 4691, LP711, LP714, LP721, PL731 Finish Fe/ZL Cylinders: ABLOY PROTEC ABLOY DISKLOCK PRO ABLOY CLASSIC Fire resistance Yes |
|
|
|
|
LC125 |
|
|
Double cylinder lock case with an automatically deadlocking latchbolt. The latchbolt can be retained inside the lock case. The lock has no lever handle function. The deadlocking is controlled by a snib in the forend. Snib position: UP = Deadlocking, latchbolt protrudes 21 mm. The lock can be opened with a key or thumbturn. DOWN = Latchbolt is retained inside the lock case. LC125X is the microswitch version of the lock. The switch changes it's status when the latchbolt protrudes 15 mm or more. Striker plates to be used with a microswitch locking box: 4692,4693. Striker plate 4690, 4691, LP711, LP714, LP721, LP731 Finish Fe/ZL Cylinders: ABLOY PROTEC ABLOY DISKLOCK PRO ABLOY CLASSIC Fire resistance - lc125mitat_dimensions.pdf
|
|
|
|
|
LC125T |
|
|
Double cylinder lock case with automatic deadlocking latchbolt. The latchbolt can be retained inside the lock case. The deadlocking function is controlled with a rotating snib, operated by a square key, in the forend. Snib function: TURN CLOCKWISE = Deadlocking, latchbolt protrudes 21 mm. The lock can be opened only with a key or thumbturn. TURN ANTICLOCKWISE = Latchbolt is retained inside the lock case. LC125TX is the microswitch version of the lock. The switch changes it's status when the latchbolt leaves its day locking position, i.e. the bolt protrudes 15 mm or more. Striker plates to be used with a microswitch locking box: 4692, 4693. Striker plate 4690, 4691, LP711, LP714, LP721, LP731 Finish Fe/ZL Cylinders: ABLOY PROTEC ABLOY DISKLOCK PRO ABLOY CLASSIC Fire resistance - lc125t_mitat_dimensions.pdf
|
|
|
|
|
LC127 |
|
|
Double cylinder lock case for fire doors. The lock has a cylinder function only and is opened with a key or thumbturn. The latchbolt protrudes 14 mm. The lock can be used with electromechanical striker plate also. Striker plates to be used with a microswitch locking box: 4692, 4693. Striker plate 4690, 4691, LP711, LP714, LP721, LP731 Finish Fe/ZL Cylinders: ABLOY PROTEC ABLOY DISKLOCK PRO ABLOY CLASSIC Fire resistance Yes lc127mitat_dimensions.pdf
|
|
|
|
|
LC204 |
|
|
Cylinder lock case with an automatically deadlocking latchbolt. The deadlocking is controlled by a snib in the forend. Snib position: UP = Deadlocking, latchbolt protrudes 20 mm. The lock can be opened only with a key or a thumbturn. DOWN = Latchbolt protrudes 14 mm. The lock can also be opened with the lever handles. LC204X is the microswitch version of the lock. The switch changes it's status when the latchbolt leaves its day locking-position, i.e. the bolt protrudes 15 mm or more. Following striker plates are recommended to be used´with a microswitch locking box: 4692, 4693. Striker plate 4690, 4691, LP711, LP714, LP721, LP731 Finish Fe/ZL, Fe/YECRLQ Cylinders: ABLOY PROTEC ABLOY DISKLOCK PRO ABLOY CLASSIC Fire resistance Yes Mortise standard SFS 5208, SS 81 73 83 lc204mitat_dimensions.pdf
|
|
|
|
|
4190 |
|
|
Cylinder lock case with an automatically deadlocking latchbolt. The deadlocking is controlled by a snib in the forend. Snib position: UP = Deadlocking, latchbolt protrudes 21 mm. The lock can be opened only with a key or a thumbturn. DOWN = Latchbolt protrudes 14 mm. The lock can also be opened with the lever handles. 4190X is the microswitch version of the lock. The switch changes it's status when the latchbolt leaves its day locking position, i.e. the bolt protrudes about 15 mm or more. Following striker plates are recommended to be used with a microswitch locking box: 4692, 4693. Striker plate 4690, 4691, LP711, LP714, LP721, LP731 Finishes: Fe/ZL, Fe/YECRLQ Cylinders: ABLOY PROTEC ABLOY DISKLOCK PRO ABLOY CLASSIC Fire resistance Yes Mortise standard SFS 5209 4190mitat_dimensions.pdf
|
|
|
|
|
4190T |
|
|
Cylinder lock case with an automatically deadlocking latchbolt. The deadlocking function is controlled with a rotating snib, operated by a square key, in the forend. Snib function: TURN CLOCKWISE = Deadlocking, latchbolt protrudes 21 mm. The lock can be opened only with a key or a thumbturn. TURN ANTICLOCKWISE = Latchbolt protrudes 14 mm. The lock can also be opened with the lever handles. 4190TX is the microswitch version of the lock. The switch changes it's status when the latchbolt leaves its day locking position, i.e. the bolt protrudes 15 mm or more. Following striker plates are recommended to be used with a microswitch locking box: 4692, 4693. Striker plate 4690, 4691, LP711, LP714, LP721, LP731 Finish Fe/ZL Cylinders: ABLOY PROTEC ABLOY DISKLOCK PRO ABLOY CLASSIC Fire resistance Yes Mortise standard SFS 5209 4190t_mitat_dimensions.pdf
|
|
|
|
|
4194 |
|
|
Cylinder lock case with an automatically deadlocking latchbolt. The latchbolt protrudes to 21mm when the door is closed. The lock has no lever handle operation. The bolt is opened with either a key or a thumbturn. 4194X is the microswitch version of the lock. The switch changes it's status when the bolt has protruded to 15 mm or more. Following striker plates are recommended to be used with a microswitch locking box: 4692, 4693. Striker plate 4690, 4691, LP711, LP714,LP721, LP731 Finish Fe/ZL Cylinders: ABLOY PROTEC ABLOY DISKLOCK PRO ABLOY CLASSIC Fire resistance Yes Mortise standard SFS 5209 4194mitat_dimensions.pdf
|
|
|
|
|
4195 |
|
|
Cylinder lock case with automatically deadlocking latchbolt. The latchbolt can be retained inside the lock case. Deadlocking is controlled by a snib in the front plate. Snib position: UP = Deadlocking, latchbolt protrudes 21 mm. The lock can be opened only with a key or a thumbturn. DOWN = Latchbolt is retained inside the lock case. The door is kept closed by using a door closer. 4195X is the microswitch version of the lock. The switch changes it's status when the latchbolt leaves its day locking position, i.e. the bolt protrudes 15 mm or more. Following striker plates are recommended to be used with a microswitch locking box: 4692, 4693. Striker plate 4690, 4691, LP711, LP714, LP721, LP731 Finishes: Fe/ZL, Fe/YECRLQ Cylinders: ABLOY PROTEC ABLOY DISKLOCK PRO ABLOY CLASSIC Fire resistance - Mortise standard SFS 5209 4195mitat_dimensions.pdf
|
|
|
|
|
4195T |
|
|
Cylinder lock case with an automatically deadlocking latchbolt. The latchbolt can be retained inside the lock case and deadlocking is controlled with a rotating snib, operated by a square key, in the forend. The lock has no lever handle function. Snib function: TURN CLOCKWISE = Deadlocking, latchbolt protrudes 21 mm. The lock can be opened only with a key or a thumbturn. TURN ANTICLOCKWISE = Latchbolt is retained inside the lock case. The door is kept closed by using a door closer. 4195TX is the microswitch version of the lock. The switch changes it's status when the latchbolt leaves its day locking position, i.e. the bolt protrudes 15 mm or more. Following striker plates are recommended to be used with a microswitch locking box: 4692, 4693. Striker plate 4690, 4691, LP711, LP714, LP721, LP731 Finish Fe/ZL Cylinders: ABLOY PROTEC ABLOY DISKLOCK PRO ABLOY CLASSIC Fire resistance - Mortise standard SFS 5209 4195t_mitat_dimensions.pdf
|
|
|
|
|
4197 |
|
|
Cylinder lock case with a cylinder function for fire doors. The lock is opened by a key or a thumbturn. The non-deadlocking latchbolt protrudes 14 mm. The lock can also be used with electromechanical striker plates. Following striker plates are recommended to be used with a microswitch locking box: 4692, 4693 Striker plate 4690, 4691, LP711, LP714, LP721, LP731 Finish Fe/ZL Cylinders: ABLOY PROTEC ABLOY DISKLOCK PRO ABLOY CLASSIC Fire resistance Yes Mortise standard SFS 5209 4197mitat_dimensions.pdf
|
|
|
|
|
4960 |
|
|
Cylinder lock case with automatically deadlocking hookbolt for folding and sliding doors. The deadlocking is controlled by a snib in the forend. Snib position: UP = Deadlocking, when the door is closed. The lock can be opened with a key or a thumbturn. DOWN = Hookbolt is retained inside the lock case. Striker plate 4662 Finish Fe/ZL Cylinders: ABLOY PROTEC ABLOY DISKLOCK PRO ABLOY CLASSIC Fire resistance - Mortise standard SFS 5209 4960mitat_dimensions.pdf
|
|
|
|
|
4960T |
|
|
Lock case with an automatically deadlocking hookbolt for folding and sliding doors. The deadlocking function is controlled with a rotating snib, operated by a square key, in the forend. Snib function: TURN CLOCKWISE = Deadlocking, when the door is closed. The lock can be opened with a key or a thumbturn. TURN ANTICLOCKWICE = Hookbolt is retained inside the lock case. Striker plate 4662 Finish Fe/ZL Cylinders: ABLOY PROTEC ABLOY DISKLOCK PRO ABLOY CLASSIC Fire resistance - Mortise standard SFS 5209 4960t_mitat_dimensions1.pdf
|
|
|
|
|
